K3 双臂机器人工作台

Create K3 Embody: Dexterity Lab, an interactive 3D dual-arm robotics workbench. Use a near-black studio, a black rounded tabletop with a faint grid, ivory articulated hands, muted gray metal arms, and soft product-photography lighting. Natural beechwood blocks and colored paper cups should provide the main color accents. Give the robot joints, connectors, fingertips, screws, and support mounts clear mechanical detail, with realistic wood grain and subtle paper fibers on the task objects.

Include Cube, Jenga, and Cups navigation tabs, with Jenga selected initially. Build the Jenga and Cups experiences around faithful playback of recorded or precomputed trajectories. Label the experience as kinematic replay, and distinguish separately simulated contact or stability data from the main motion. Label force readouts as simulated and do not imply closed-loop robotic control.

For Jenga, show a tower of 54 wooden blocks in 18 alternating layers. Animate the hands through alignment, a 30 mm push, pinch, a 105 mm extraction, placement, and retraction, repeating for three target blocks. Add a separate contact-dynamics sequence that applies lateral disturbances and shows the tower's stability response and collapse. Include a shortcut that jumps to this sequence, with synchronized push force, friction force, maximum tilt, contact count, and collapsed-block readings.

For Cups, animate 15 cups into a five-level pyramid. Show each approach, grasp, lift, transfer, placement, release, and retreat. Include a simulated settling overlay after release, support-load annotations, cup tilt, and an optional slow-release mode that slows the critical release moment. Preserve the poses of cups already placed while later cups are manipulated. 把桌面任务换成小型装配车间：黑色圆桌换成防静电绿色工作台，任务对象改为电机零件、齿轮与螺丝，双臂完成取件、对位、旋拧与放置。保留轨迹回放、时间轴、工程标注与模拟读数机制，力的读数仍明确标注为模拟值。 Provide play and pause, restart, a scrub timeline, one-second stepping, and playback speeds from 0.25× to 10×. Offer full-arm, close-up, and top views, plus orbit and zoom controls. Include a task-object diagram whose blocks or cups can be selected to jump to the corresponding operation. Display the current task, action, target, active hand, phase, and completed count in a compact action-plan panel.

Overlay fine engineering callouts for shoulders, elbows, wrists, target objects, and the tower. Show wrist-speed curves, elbow angles, tool-point positions in millimeters, and reach measurements synchronized with playback. Let users hide labels. Keep the annotations clear of the hands, objects, and controls, and make camera framing adapt to the available screen space.

Create K3 Embody: Dexterity Lab, an interactive 3D dual-arm robotics workbench. Use a near-black studio, a black rounded tabletop with a faint grid, ivory articulated hands, muted gray metal arms, and soft product-photography lighting. Natural beechwood blocks and colored paper cups should provide the main color accents. Give the robot joints, connectors, fingertips, screws, and support mounts clear mechanical detail, with realistic wood grain and subtle paper fibers on the task objects.

Include Cube, Jenga, and Cups navigation tabs, with Jenga selected initially. Build the Jenga and Cups experiences around faithful playback of recorded or precomputed trajectories. Label the experience as kinematic replay, and distinguish separately simulated contact or stability data from the main motion. Label force readouts as simulated and do not imply closed-loop robotic control.

For Jenga, show a tower of 54 wooden blocks in 18 alternating layers. Animate the hands through alignment, a 30 mm push, pinch, a 105 mm extraction, placement, and retraction, repeating for three target blocks. Add a separate contact-dynamics sequence that applies lateral disturbances and shows the tower's stability response and collapse. Include a shortcut that jumps to this sequence, with synchronized push force, friction force, maximum tilt, contact count, and collapsed-block readings.

For Cups, animate 15 cups into a five-level pyramid. Show each approach, grasp, lift, transfer, placement, release, and retreat. Include a simulated settling overlay after release, support-load annotations, cup tilt, and an optional slow-release mode that slows the critical release moment. Preserve the poses of cups already placed while later cups are manipulated. 把演示改造成机器人课堂教学材料：每个动作阶段配一段 50 字以内的中文讲解，说明机械臂当前在做什么、用到哪类轨迹规划。新增“讲解模式”开关，开启后播放自动减速，关键动作暂停并弹出知识点卡片，关闭后恢复纯净回放。 Provide play and pause, restart, a scrub timeline, one-second stepping, and playback speeds from 0.25× to 10×. Offer full-arm, close-up, and top views, plus orbit and zoom controls. Include a task-object diagram whose blocks or cups can be selected to jump to the corresponding operation. Display the current task, action, target, active hand, phase, and completed count in a compact action-plan panel.

Overlay fine engineering callouts for shoulders, elbows, wrists, target objects, and the tower. Show wrist-speed curves, elbow angles, tool-point positions in millimeters, and reach measurements synchronized with playback. Let users hide labels. Keep the annotations clear of the hands, objects, and controls, and make camera framing adapt to the available screen space.